Geometric DFMPro v18.104.22.16876 for ProE WF/Creo x86/x64 | 651 MB
Pre ProEngineer WildFire 4-5 32/64 bit, Creo Elements / Pro 32/64 bit, Creo Parametric 1.0-2.0 32/64 bit, Creo Parametric 3.0 64 bit only
Description: DFMPro (Design For Manufacturbility Professional) is an easy-to-use tool for verifying manufacturability of parts and components for designers and manufacturing engineers is integrated into Pro / ENGINEER. Its use makes it easier to check and define the technological parts of the project, which can be time-consuming or costly to manufacture with respect to turning, milling, turning, milling, processing and other sheet.
Rapid analysis of the technological details in terms of opportunities and milling or turning principles runs through module DFMPro. You simply select the type of items - milling and turning - and within seconds get a detailed report on the possible processing problems. DFMPro find all unavailable for the cutter elements that do not meet standards of the enterprise ratio depth / diameter or accessories to the standard range of hole diameters, rounding the outer edges and triangular inner corners, holes facing the outside faces are not perpendicular to them or cross the internal cavity, and even inflated accuracy tolerances. For turning parts are also to be found the groove without rounding on the inner diameter, and it's not rounded circular edge. Numerical values processability criteria can be varied widely in accordance with requirements of the enterprise.
DFMPro is used in case of increased requirements to the capabilities of the system to verify the manufacturability of parts, as well as for the use of such a tool in relation to the milling and sheet metal parts. This module performs a greater number of checks - and examines not only the geometry of the parts, but the user and attributes, such as the brand of the material - but also allows you to set rules for analysis in a much more widely.